- Cable Tester CCT : Continuity and resistivity Measurement and Control from 124 to 1024 contacts to validate your harness and test connectors in 2-wires: .1Ω to 100KΩ ± 1% ± .1Ω and also : 500KΩ, 1MΩ, 5MΩ ± 10% in 4-wires: .005Ω to10Ω ± 2% ± .005Ω test rates: 128 points in 0.25 second
- System 3G for intermediate tests in production line: Measurements of resistive elements and pyrotechnical elements in sub-groups Autonomous test that is easy to install on a production line

- MCT Station : test station type CPU The test module CT is used for electric tests in 2 and 4 wires and as a test system : multiplex Communication CAN, LIN control of electric and electronic test sequences on 6 channels CPU control of your components with 8 basic input/output Remotecontrol connectable to the TCP/IP network

- EOL Station : test station type PC Test station type PC with touchscreen Equipped with 10 parallel measuring lines and 90 possible basic connections; for the management of a great number of references and configurations remote update and remote maintenance connection with TCP/IP network

- Modular Test System STEM « New» Very complete test system adapted to the end control and integrated in a test bench ° 32 analog signals ° 32 digital signals ° 2 outputs 10 Mbit Ethernet ° 1 CAN ° 16 x RS 485 and 1 x RS 232 ° 1 USB

The architecture of the modules is managed through a master-slave-combination, which makes this solution very upgradeable. The computer serves as an interface for the operator, for the creation of test sequencies and for the local data backup.